User Manual

57
Parameter
Function
Flash delay
 Means flash become off after a period of time when relay
activation ends.
 Unit is in second, within 10s ~ 300s.
Record
System auto activates motion detection channel to record once
alarm occurs (working with motion detection function).
Record Delay
System can delay the record for specified time after alarm ended.
The value ranges from 10s to 300s.
Relay out
 There is 1-channel alarm output.
 Corresponding to motion detection alarm output port.
 Enable alarm activation function. You need to select alarm
output port so that system can activate corresponding alarm
device when alarm occurs.
Alarm delay
System can delay the alarm output for specified time after alarm
ended. The value ranges from 10s to 300s.
Send Email
After this function is enabled, system can send out email to alert
you when alarm occurs and ends.
Snapshot
After you enabled snapshot, the system will automatically
snapshot if alarm occurs.
Important:
Only some series product supports PIR alarm and flash setup.
The PIR interface is shown as in Figure 5-35.
Figure 5-36