User Manual

58
Please refer to the following sheet for detailed information.
Parameter1
Function
Enable
After enabled, PIR alarm will work.
Flash
After enabled, when alarm occurs, the system will automatically turn on flash.
Flash delay
 Means flash become off after a period of time when relay activation ends.
 Unit is in second, within 10s ~ 300s.
The flash set interface is shown as in Figure 5-37.
Figure 5-37
Please refer to the following sheet for detailed information.
Parameter
Function
ON/OFF
ON means flash is on; OFF means flash is off.
Weak-strong
bar
Via dragging this bar to adjust flash brightness.
All
Check the day flash works.
Period
Period that flash is on.
5.3.3 Abnormity
Note:
Only device with SD card function has these three statuses: No SD card, capacity warning, SD card
error.
Device without SD card function does not have the above three statuses. See Figure 5-38 through
Figure 5-41.