User Manual

60
Figure 5-40
Figure 5-41
Please refer to the following sheet for detailed information.
Parameter
Function
Event
Type
 The abnormal events include: no disk, no space, disk error, net
error, offline, IP conflict.
 Threshold: You can set the minimum percentage value here. The
device can alarm when capacity is not sufficient.
 You need to draw a circle to enable this function.
Record
System auto activates channel to record once alarm occurs (For offline
type only. See Figure 5-41. ).
You need to check the box to enable this function.
Record
delay
System can delay the record for specified time after alarm ended. The
value ranges from 10s to 300s.
Relay Out
The corresponding alarm output channel when alarm occurs. You need
to check the box to enable this function.
Relay out
delay
The alarm output can delay for the specified time after alarm stops. The
value ranges from 10s to 300s.