User Manual

61
Parameter
Function
Send
email
After you enabled this function, the system can send out email to alarm
the specified user.
This function is invalid when network is offline or IP conflict occurs.
5.4 Storage
5.4.1 Record Schedule and Snapshot Schedule
In these two interfaces, you can add or remove the schedule record/snapshot setup. See Figure 5-42
and Figure 5-43.
There are three record modes: general (auto), motion detect and alarm. There are six periods in one
day. Please make sure you have enabled the corresponding record mode in the Setup->Storage-
>Conditions.
You can view the current time period setup from the color bar.
 Green color stands for the general record/snapshot.
 Yellow color stands for the motion detect record/snapshot..
 Red color stands for the alarm record/snapshot.
Figure 5-42