User's Manual

There
is a possible finger crush hazard due to the
moving parts of the
door. Care should be taken when
closing
the door.
The unit must be
installed and operated on a solid,
stable
and level working surface; ensuring that the
ventilation holes under
the unit and at the rear of the
unit
are not obstructed.
General Operating Precautions
Ensure that
the power is switched off at both the AC
mains supply
outlet and at the back of the unit before
inserting or removing
the mains power cord.
The PSS‐1 can
reach temperatures of over 98°C and can
remain
hot for a time after the PSS‐1 system is turned
off.
If
conditions are set such that the experiment
is finished
with the
plate at a high temperature it will exit the unit
with
the potential to burn the operator and care should
be
taken.
14