User's Manual

3)Switch the mains power on at supply outlet first, and then switch the unit on

using the power switch located at the rear of the unit.

This can take 30seconds as the unit initializes the system and runs a basic‐settings.

4) Start‐up is complete when this screen is shown.

6.1 Basic settings when first time use the

system

For the first time to use this system, please follow the step to finish the basic setting:

1. Select Time Zone

Scroll the screen to choose the time zone. Four time zones support here

2. Setup Wi‐Fi connection

This system required to work with Wi‐Fi connection. Select an available AP to

connect.