Operation Manual

iCarsoft i910 BMW
iCarsoft i910 BMWiCarsoft i910 BMW
iCarsoft i910 BMW Multi
MultiMulti
Multi-
--
-system Scanner
system Scanner system Scanner
system Scanner
9
3
33
3.
. .
. Software Function
Software FunctionSoftware Function
Software Function
CATION: Don
CATION: DonCATION: Don
CATION: Don’
’’
’t connect or disconnect any test
t connect or disconnect any test t connect or disconnect any test
t connect or disconnect any test
equipment
equipmentequipment
equipment with ignition on or engine running.
with ignition on or engine running. with ignition on or engine running.
with ignition on or engine running.
1) Turn the ignition off.
2) Locate the vehicle’s 16-pin Data Link
Connector (DLC)
3) Plug into the scan tool cable connector to the
vehicle's DLC ，the scan tool will be light.
As shown
4) Turn the ignition on. Engine can be off or
running
5) Press any key to enter Main Menu.