Instructions

EN
6
the scan tool connected power.
 Make sure the ignition is ON when you connected the scan tool already.
Note:
For vehicles manufactured by different vendors, it is possible that it has
different diagnostic menus. For details, please follow the instructions on the
screen to proceed.
6.1 Diagnose
This function is specially designed to
diagnose electronic control system of
single vehicle model connected the scan
tool already.
The diagnostic application connects data to
the electronic control system of the test
vehicle used for vehicle diagnostics. The application performs function tests to
retrieve vehicle diagnostic information such as fault and event codes and
real-time data for various vehicle control systems such as engine,
transmission and ABS.
6.1.1 Vehicle identification
When the device is connected to the
vehicle, there are two ways to enter the
diagnostic system:
1. Auto identify or VIN identify
2. Vehicle select
Note:
“Auto identify” or “VIN identify” will be displayed on the interface, depending on
the vehicle type.
6.1.1.1 Auto identify
By reading the vehicle specific information (including VIN identify), the
vehicle identification can be carried out quickly.
6.1.1.2 VIN identify