Instructions

EN
17
value of the automatic sunroof at each position.
5) At this time, various actions of the sunroof will be executed. The
status on the screen changes to “ON”.
Note: marked means that the information here is pressed [?] button to
see all information.
 Activate ESP System / Function Test
After the ABS / ESP has been overhauled or replaced, it is
necessary to carry out the function test to activate the ABS / ESP system,
and at the same time, it is necessary to complete the matching of ABS /
ESP module according to the test procedure.
 Brake System Bleeding
When replacing the ABS computer or when the ABS brake oil runs
out, you need to perform this basic adjustment to empty the air in the
brake fluid to ensure the safe and effective operation of the ABS system.
 Adaptation --- This function allows you to perform adaptive learning /
reset / calibration and other functions for each control module, and also
includes some important module data for parameter adjustment.
Focus on the following three functions：
 Central Locking: Auto-Lock
This setting allows you enable / disable the driving automatic locking
function according to your personal preference (when the vehicle speed
is greater than 15 km/h, all doors will be locked automatically).
To preform Central Locking: Auto-Lock:
1) Access “Adaptation”, select “Central Locking: Auto-Lock”.