Instructions

EN
33
accessed by reading directly from the wheel unit or by using the identification
reading tool. On completion, a specific road test will be required followed by
the tire pressure monitor system confirmation application.
1) Select the TPMS icon in the service function icon or the TPM option in
service in diagnostic mode. Select the correct vehicle according to the
on-screen instructions.
2) Preform tire pressure sensor replacement to go to the next step and
select the standard wheel with tire pressure sensor. Select the right front
wheel sensor according to the screen.
3) Read the operation prompt carefully, input 8-bits Sensor Identifications as
required, and press [OK].
4) After passing the 8-bit sensor identification test, carry out a specific road
test.
6.2.12 Air-conditioner