Instructions

EN
36
3) Press the [reduce] or [increase] button to adjust the engine idle speed.
4) Follow the prompts on the screen until the operation is completed.
5) Press [OK] to exit.
6.2.15 Body stability
Learning and calibration after replacing the body stability control unit and
other related components, such as: lateral acceleration sensor for active roll
stabilization system, BAS brake assist system, ESP electronic stability
program, calibration of yaw rate / lateral and longitudinal acceleration sensors,
pedal angle Sensors, etc. (Take Benz as a sample).
1) Select the "Body stability" icon in the service function icon, Select the
correct vehicle according to the on-screen instructions.
2) Select the learning process and turn on ignition.
3) Carefully read the prompt information on the screen. Before performing
this operation, complete the BAS brake assist system, and replace the
ESP and BAS press units and other components.