Instructions

EN
3
1) iCarsoft Multi-system Car Diagnostic tool V3.0 Series can do it all-reads
and clears trouble codes on all the systems such as engine ,transmission,
ABS and airbag etc.
2) Support OBDII / EOBD Ten Modes of Operation.
3) Read Live Data.
4) Full ECU Diagnosis.
5) Applies to the single Brand of all Models equipped with OBDII-16DLC.
6) Easy To Use with Silicone Keys.
7) Auto identify technology can automatically identify model and year
information in no time.
8) Actuation Test / Bi-directory Test is used to access vehicle-specific
subsystem and component tests.
9) Basic Setting means reset some basic parameter settings for each control
module, especially some parts / sensors, etc.
10) Adaption, this function allows you to perform adaptive learning / reset /
calibration and other functions for each control module, and also includes
some important module data for parameter adjustment.
11) Support Freeze Frame of Fault Code functions.
12) Oil Light / Service Reset: Support service lamp reset.
13) Electronic Parking Brake (EPB) system maintenance, deactivates and
reactivates the EPB system for replacement and initialization.
14) Battery Management System (BMS), registers new battery to the BMS
while battery replacement.
15) Diesel Particulate Filter (DPF) regeneration control system, request the
DPF regeneration process while DPF blockage and turn off the DPF
indicator.
16) Electronic Throttle Control system (ETC), relearns the throttle valve
control value while clear or replace the throttle value.
17) SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering
wheel to straight ahead, or recalibrates SAS while steering part
replacement.
18) ABS Bleeding (BLD), Release the air to restore ABS brake sensitivity, or
relearn while ABS replaced.