User Guide

iCarsoft English User’s Manual
7
4. Connections & Settings
4.1 Install TF card
1) Take out the TF card from package box.
2) Insert the TF card into the TF card slot perpendicularly. Make sure is fully
inserted in the right place with the “micro” label facing upward.
Note: You can hear a clicking sound if you insert the TF card in the right place.
Press the card slightly, it will be ejected automatically.
4.2 Connections
1) Turn the ignition off.
2) Locate the vehicle’s DLC socket.
3) Plug one end of the diagnostic cable into the OBDII 16pin connector of
iCarsoft Serial products/CR Plus, and connect the other end to the vehicle’s
DLC.
4) Turn the ignition on. Engine can be off or running.
5) After finishing, the system will start initializing. After initialization, the system
will enter the main menu interface. See Fig. 3-1.
Figure 3-1
CAUTION: Don’t connect or disconnect any test equipment with ignition
on or engine running.