Installation Manual

Video Splitter Modules

2 GHz Video Splitters can support up to eight locations, offering a choice of 4, 6, or

8-ports, and are designed for installation in ICC’s Net.Media Centers. The Video

Splitters receive and distribute CATV, antenna, satellite, or modulated video

signals up to eight analog or digital television sets.

Deluxe Series Video Splitter Modules

INSTALLATION INSTRUCTIONS

Residential Cabling Solutions

ASSEMBLY INSTRUCTIONS

USTOMER CARE / TECHNICAL SUPPORT • CSR@ICC.COM / 888-275-4422 (ASK-4-ICC)

ICC.COM

2 GHz Video Splitter, 1 piece

Fasteners, 4 pieces

ICRESAV42L

ICRESAV62L

ICRESAV82L

INCLUDES:

Step 1.

1. Place module horizontally and align fasteners

with the peg board. Make sure the fasteners are

NOT

in locked positions.

Step 3.

3. Once module bracket is in the desired location,

push the fasteners to their lock position.

Step 2.

2. Push the module so that the fasteners goes into

the peg board of the enclosure.

Fasteners (4x)

Splitter

Enclosure

Module Bracket

PAGE 1
Residential Cabling Solutions Deluxe Series Video Splitter Modules I N S T A L L A T I O N I N S T R U C T I O N S Video Splitter Modules 2 GHz Video Splitters can support up to eight locations, offering a choice of 4, 6, or 8-ports, and are designed for installation in ICC’s Net.Media Centers. The Video Splitters receive and distribute CATV, antenna, satellite, or modulated video signals up to eight analog or digital television sets.
PAGE 2
ASSEMBLY INSTRUCTIONS Step 4. 4. Prepare an incoming coaxial cable and outgoing coaxial cable by using ICC’s coax cable stripper tool (ICACSCSCTV), All-in-One Universal Compression tool (ICACSCT01U), and F-type compression connectors (ICRDSAV01F for RG-6, and ICRDSAV04F for RG-6 Quad-Shield). Connect the incoming cable to the “IN” port of the splitter and the outgoing coaxial cables to the “OUT” ports. The “OUT” ports route the video signal to each location.