Installation Instructions

8-Port Telephone Module with RJ31X Jack

INSTALLATION INSTRUCTIONS

Residential Cabling Solutions

ASSEMBLY INSTRUCTIONS

CUSTOMER CARE / TECHNICAL SUPPORT • CSR@ICC.COM / 888-275-4422 (ASK-4-ICC)

www.icc.com

Step 1.

1. Place module horizontally and align fasteners

with the peg board. Make sure the fasteners are

NOT

in locked positions.

Step 3.

3. Once the module bracket is in the desired

location, push the fasteners to the locked position.

Step 2.

2. Push the module so that the fasteners goes into

the peg board of the enclosure.

Fasteners (4x)

110 IDC’s

Enclosure

Bracket

ICRESVPA1C

ICRESVPA2C

ICRESVPA3C

INCLUDES:

Telephone Module with RJ31X Jack

ICC’s Telephone Module with RJ31X Jack is an 8-port bridged telephone solution. This module offers a 110 IDC input and an expan-

sion jack for additional connectivity. It supports up to 8 telephone outlets for phone, fax, modem devices, and has access up to 4

incoming phone lines. Available in three different styles: Premier, Deluxe, and Compact.

8-Port Telephone Module with RJ31X Jack, 1 piece

Fasteners, 4 pieces

This installation instruction is designed

for the following part numbers:

PAGE 1
Residential Cabling Solutions 8-Port Telephone Module with RJ31X Jack I N S T A L L A T I O N I N S T R U C T I O N S Telephone Module with RJ31X Jack ICC’s Telephone Module with RJ31X Jack is an 8-port bridged telephone solution. This module offers a 110 IDC input and an expansion jack for additional connectivity. It supports up to 8 telephone outlets for phone, fax, modem devices, and has access up to 4 incoming phone lines.
PAGE 2
ASSEMBLY INSTRUCTIONS Step 4. 4. Connect the incoming phone line to the 110 IDC labeled “From Source.” Use a 110 punch down tool to terminate each wire between contact blades. Identify each outlet cable and connect to 110 block labeled “To Locations.” Punch down twisted pairs depending on which nes li are desired to be activated at each location. NOTE: Line#1 = Blue, Line#2 = Orange, Line#3 = Green, Line#4 = Brown Example: Each 110-block represents one location.