User's Manual

User Manual
13 / 26
Link Settings (WLAN)
Item
Description
Default
Secondly hotspot Settings
Enable
Click the toggle button to enable/disable, an alternative
hotspot for the configuration of the router wifi connection
Disable
Security Mode
Select the security authentication method, the options
include: OPEN, WEP, WPA/WPA2.
When the authentication method is WPA/WPA2, it also
means automatic matching (that is, all three modes can be
supported);
WPA/WPA2
SSID
SSID parameters of the alternative hotspot connected to the
router wifi
router
Connect to
Hidden SSID
Click the toggle button to enable/disable the "Connect to
hidden SSID" function. When the device is in client mode
and needs to connect to any access point that has hidden
SSID, this function must be enabled here.
OFF
Password
Enter the password of the access point that the device wants
to access. Please enter 8~63 characters.
Null
Static Address Settings
IP Address
Set the IP plus mask that can access the Internet,
eg.,192.168.1.1/24.
Null
Gateway
Enter the IP address of the WiFi AP.
Null
Primary Server
Set the preferred DNS server.
Null
Secondary
Server
Set the primary DNS server.
Null
Ping Detection Settings
Enable
Click the toggle button to enable/disable the ping detection
mechanism, a keep alive policy of the router.
ON
Primary Server
Router will ping this primary address/domain name to check
that if the current connectivity is active.
8.8.8.8
Secondly
Server
Router will ping this secondary address/domain name to
check that if the current connectivity is active.
114.114.114.114
Interval
Set the ping interval, measured in seconds.
300
Retry Interval
Set the ping retry interval. When ping failed, the router will
ping again every retry interval.
5
Timeout
Set the ping timeout, measured in seconds.
3
Max Ping Tries
Set the max ping tries. Switch to another link or take
emergency action if the max continuous ping tries reached.
3
Advance Settings