User's Manual

User Manual
15 / 26
Link Settings (WLAN)
Item
Description
Default
Verbose Debug
Enable
Click the toggle button to enable/disable this option. Enable for
verbose debugging information output.
OFF
Cellular Status
Item
Description
Index
Indicate the ordinal of the list.
Modem Status
Show the operating status of the wireless module.
ModemModel
Show the model of the wireless module.
Current SIM
Show the SIM card that your router is using: SIM1.
Phone Number
Show the phone number of the current SIM.
Note: This option will be displayed if enter manually in Cellular > Advanced
Cellular Settings > SIM1/SIM2 > Phone Number.
IMSI
Show the IMSI number of the current SIM.
ICCID
Show the ICCID number of the current SIM.
Registration
Show the current network status.
Network Provider
Show the name of Network Provider.
Network Type
Show the current network service type, e.g. GPRS.
Signal Strength
Show the current signal strength detected by the mobile.
Bit Error Rate
Show the current bit error rate.
PLMN ID
Show the current PLMN ID.
Local Area Code
Show the current local area code used for identifying different area.
Cell ID
Show the current cell ID used for locating the router.
IMEI
Show the IMEI (International Mobile Equipment Identity) number of the radio
module.
Firmware Version
Show the current firmware version of the radio module.
AT Debug
Item
Description
Default
Command
Enter the AT command that you want to send to cellular module
in this text box.
Null
Result
Show the AT command responded by cellular module in this
text box.
Null