User's Manual

User Manual
20 / 26
CLI examples
The best and quickest way to master CLI is firstly to view all features from the webpage and then
read all CLI commands at a time, finally learn to configure it with some reference examples.
Example 1: Show current version
# status system
firmware_version = 1.0.0
firmware_version_full = "1.0.0 (Rev 2820)"
hardware_version = 1.2.0
kernel_version = 3.10.108
device_model = ICE1001-S4LC (Global)
serial_number = 05170120040021
uptime = "1 day, 00:55:30"
system_time = "Tue Apr 14 20:18:44 2020 (NTP not enabled)"
ram_usage = "9M Free/64M Total"
Example 2: Update firmware via tftp
# tftpupdate （space+?）
firmware New firmware
config New configuration file
# tftpupdate firmware （space+?）
filename New file
# tftpupdate firmware filename ice1001-firmware-sysupgrade-unknown.ruf host 192.168.100.99
//enter a new firmware name
Downloading
Download success.
Upgrading
Upgrade success. //update success
# reboot // take effect after restart
Rebooting...
OK
Example 3: Set link-manager
# set
# set (space+?)
cellular Cellular
ddns DDNS
dido DIDO
email Email
ethernet Ethernet
event Event Management