User's Manual

User Manual
22 / 26
verbose_debug_enable Verbose Debug Enable
# set link_manager link 1 type wwan1
OK
# set link_manager link 1 wwan（space+?）
auto_apn Automatic APN Selection
apn APN
username Username
password Password
dialup_number Dialup Number
auth_type Authentication Type
data_allowance Data Allowance
billing_day Billing Day
# set link_manager link 1 wwan data_allowance 100 //open cellular
switch_by_data_traffic
OK //setting succeed
# set link_manager link 1 wwan billing_day 1 //setting specifies the day of
month for billing
OK //setting succeed
…
# config save_and_apply
OK // save and apply current configuration, make you
configuration effect
Example 4: Set Cellular
# show cellular all
sim {
id = 1
card = sim1
phone_number = ""
pin_code = ""
extra_at_cmd = ""
telnet_port = 0
network_type = auto
band_select_type = all
band_settings {
gsm_850 = false
gsm_900 = false
gsm_1800 = false
gsm_1900 = false
wcdma_800 = false
wcdma_850 = false
wcdma_900 = false
wcdma_1900 = false