Brochure

Ice. Pure and Simple

INTRODUCINGTHEBSLOPEFRONTBIN

A reinforced bin with an innovative accessory kit makes

installation and cleaning easier than ever before.

B Bin

What makes this bin unique is that the front cross member of the bin has

been reinforced, so when used in conjunction with the filler panel kit BPF

(details below) allows for any Ice-O-Matic" modular ice machine to be

installed without the need for a KBT*.

Highlights

• Easier-to-clean bin

• Lower installed cost

• NSFapproved with 30” machine

Machine Specs

• Slope-Front Modular Bin stores up to 854 lbs. (388 kg)

• ” ( mm) wide, ” ( mm) deep, ” ( mm) high

11100 E. 45th Avenue • Denver, CO 80239 • Phone: 1. 866. PURE. ICE • Fax: 303. 371. 6296 • www.iceomatic.com

OUR QUALITYICE-O-MATICPRODUCTS HAVE BEEN

MANUFACTURED IN DENVER FOR THE LAST  YEARS

BWITHKBTKIT

BPF Filler Panel Kit

This kit consists of two panels, gasket strips and bin straps. Panels have an innovative blow-molded design that

keep the bin well insulated. They can be quickly removed for cleaning and are NSF® approved.

Bin Filler Kit Installation

• Place any " machine atop the center of the bin and attach to bin with straps.

• When installing an ICE you must use the bin straps included with the BPF-1 Filler Panel Kit.

• Add gasket strips to the front of the bin on both sides of the ice maker.

• Add filler panels on each side of machine.

Bin Cleaning

• Remove filler panels and simply reach in to wipe down the interior of the bin.

Notes

The new design will not affect " installations or eliminate the need for the KBT and KBT tops.

* The KBT will remain in the product offering to accommodate customers who have existing Bs and

want to install a " ice machine on them. Installing a " machine on a B without the use of a KBT

is unsafe and not authorized by Ice-O-Matic.

BWITHBPF

FILLERPANELKIT

The BPF-1 Filler Panel Kit is lightweight, easy to install

and easy to remove for quick access to and cleaning of

the bin. The KBT5 Kit is a solid piece of metal which

cannot be removed without removing the ice machine.

NEW!