Compatibility Chart

The iWash S-11 Elongated Bidet Seat is compatible with the following Icera toilets:
iWash S-11 Compatibility
Installation requirements for non-Icera toilets (elongated toilets only)
ONE-PIECE TOILETS
Model Name Model #
Cadence C-6270
Cadence Dual-Flush C-6275
Malibu II 6250.128
Vista II C-2620
Canto II C-6630
Karo II C-6640
Julian C-2320
Muse II C-6690-F (or C-6690)
Presley SE 6402.128
Riose C-6200
Clarity (Wallhung) C-6610
TWO-PIECE TOILETS
Model Name Model #
Cadence II C-3170-II, T-3170-F
Cadence II Dual-Flush C-3170-II, T-3175
Malibu II Back-Outlet C-3240-C, T-3240
Malibu II 6325.128, 6325.028
Malibu II Dual-Flush 6325.128, 6325.228
Palermo II C-2250, T-2250 (or T-2251)
Palermo Classic C-2260, T-2270
Huntington C-2260, T-2260
Richmond 6123.218, 6125.028
The distance between the
seat bolt holes and the
front of the toilet bowl
should be approximately
18”.
The distance from the center of
the seat bolt holes to the toilet
tank must be at least 1.5”.
The distance between the
seat bolts holes must be
between 5-1/4” and 8”.