Operation Manual

last 1 second.
• After setting alarming ringing, press MODE key to exit to clock mode
• Press ALARM key, alarm mode will be on ALARM light will be on / off
(ALARM light off)
• When it is the set alarming time , the product begins alarming. When
alarming, press any key (except the SNOOZE key) to stop alarming. If
press SNOOZE key then activate the snooze mode(SNOOZE light will
flash, snooze time is 5 minutes (snoozing at most 2 times)
4). Radio mode
• When not at alarm mode, press RADIO key to activate radio. At radio mode
press RADIO key to exit from radio mode.
• At radio mode, then the frequency will display
• Press SET key to play the saved radio frequency, and continually pres
SET key to choose the next radio frequency.
• Press SET key 3 seconds then one sound “BI”then the playing radio
frequency will be saved as the last memory. Can save 20 stations. If continue
saving, then the last saved frequency will make the first saved one lost.
• Press UP to get previous frequency, DOWN to get the next press UP
or DOWN to auto scan stations forward or backward.
• Press ALARM key 3 seconds to set sleeping time of radio, then press UP
or DOWN to change the sleeping time for 10/20/30/40/50/60 minutes. After
setting sleeping time, repress ALARM key to exit the setting. When it is the set
time , then radio will be off.
• At radio mode, press SNOOZE key to change to clock mode, 10 seconds
later radio will automatically restore.
• Short press VOL+ or VOL- key to adjust the volume, each time one
grade; Long press VOL+ or VOL- key to fast adjust the volume.
5). Sound-control
• When it can’t be always display, then sound- control can be effective
• If can receive the sound signal, then display can last 10 seconds.
6). LED digital display
When disconnect outer power and only make it be clock mode, better push the
“Display”Switch to the “off” to save power.
• The product can display long time (need much power) / display by sound-control. When
push the “display” switch to “off”, display will be off within 10 seconds , then press any
key and the display will last 10 seconds or by sound control it also can light up for 10
seconds.
• When display is light, display will be only half bright during 21:00 PM 06:59:59 AM.
• Connect with outer power then the product will always display(DC 6V 600mA)
7). AUX IN function
During radio play back mode, you may insert any other audio device into to the 3.5mm plug
into the “AUX IN (Ф3.5mm” jack)