399 instruction manual 1. 2. 3. 4. ON/OFF/AUTO/ALARM LED DISPLAY AUTO INDICATOR SNOOZE / SLEEP OFF 5. 6. 7. 8. ALARM SET TIME SET SLEEP SET ALARM OFF 9. 10. 11. 12. 13. HOUR SET MINUTE SET VOLUME CONTROL FOCUS TUNNING CONTROL 14. BATTERY BACK-UP 15. FM ANT. WIRE 16. AC Cord 17. 18. 19. 20. 21.
2. MINUTE SET FOR PROJECTION 23. FM SWITCH AC POWER OPERATION Before connecting to the power supply ensure that the supply corresponds to the information on the rating label on the rear of the apparatus: (AC 230V 50Hz) WARNING Disconnect the mains plug from the supply socket when not in use. To avoid the risk of electric shock do not remove the cover of the apparatus. There are no user serviceable parts inside. To prevent fire or shock hazard do not expose the apparatus to rain or moisture.
ALARM 1. To set the Alarm time, press the Alarm Set Button (5) and Minutes Set Button (10), or Hour Set Button (9), together until the required alarm time is displayed. 2. Set the ON/OFF/AUTO/ALARM switch (1) to Alarm, the Auto indicator (3) will illuminate. The Alarm is now set to activate at the required time. 3. The alarm can be temporarily stopped for 9 minutes by pressing the Snooze/Sleep off Button (4). This can be repeated up to 5 times. 4.
NOTE : PROJECTION TIME IMAGE ON THE CEILING OR WALL OF A DARKENED ROOM. MAXIMUM PROJECTION DISTANCE IS 2M. THE LED DIGITAL CLOCK AND THE PROJECTION CLOCK MUST BE SET SEPERATEDLY. NOTE : The socket outlet shall be installed near the apparatus and shall be easily accessible. The ventilation should not be impeded by covering the ventilation openings with items, Such as newspapers, table-cloths, curtains, etc.; No naked flame sources, such as lighted candles, should be placed on the apparatus.