Data Sheet

Waterslot 700

Description:

The Water Block valve is an overflow safety device, which controls the maximum consumption of

water between 5 and 50 litres. Its function is to measure the number of litres of water that have

passed through it. If this quantity exceeds the set value, the Water Block stops the flow and

keeps this safety condition until user intervention. If the water volume does not exceed the set

value, the Water Block mechanically and automatically resets the measured volume and the

Water block is ready to restart a new measurement cycle. The Water Block does not require

external energy, simply water flow through it. To reset the water block after a failure case, it is

possible to use the optional reset device p/n 100245

PAGE 1
Waterslot 700 Description: The Water Block valve is an overflow safety device, which controls the maximum consumption of water between 5 and 50 litres. Its function is to measure the number of litres of water that have passed through it. If this quantity exceeds the set value, the Water Block stops the flow and keeps this safety condition until user intervention.
PAGE 2
Part number: Part name: 100041 Water Block General characteristics: ¾" - threaded female connection in the inlet (North America-GHT / Europe-BSP). ¾" - threaded male connection in the outlet (North America-GHT / Europe-BSP). Vertical assembly preferred.
PAGE 3
E P F 8 5 7 4 6 3 Probeer nimmer het Waterslot open te draaien om de inhoud te bekijken. B 2 Een vaatwasmachine gebruikt normaal niet meer dan circa 15 liter water per onderdeel van het wasprogramma; u moet de pijl dan op 4 zetten (4x4,5 = 18). MONTAGE Let op dat u, voor u het Waterslot aan de kraan draait, het bijgeleverde zeefje met rubber ringetje (E) in het Waterslot heeft gelegd.