System information

101
take effect (Please wait for about 30 seconds while router is rebooting).
3-3-1 Access Control
This function allows or denies computers with specific MAC address from
connecting to the network; it can also allow or deny computers with specific
IP address, protocol, or port.
Please click ‘Firewall’ menu on the left of web management interface, then
click ‘Access Control’, and the following message will be displayed on your
web browser:
Here are descriptions of every setup items:
Enable MAC Check this box to enable MAC address based
Filtering (1): filtering, and please select ‘Deny’ or ‘Allow’ to decide
the behavior of MAC filtering table. If you select deny,
all MAC addresses listed in filtering table will be
denied from connecting to the network; if you select
allow, only MAC addresses listed in filtering table will
be able to connect to the network, and rejecting all
other network devices.
Client PC Please input the MAC address of computer
1
2 3
5
6
7
8
9
10
12
13
14
15
16
11
4