System information

C H A P T E R I I :

S Y S T E M A N D N E T W O R K S E T U P

2-1 Build network connection

Please follow the following instruction to build the network connection

between your new WIRELESS router and your computers, network devices:

1. Connect your xDSL / cable modem to the WAN port of router by Ethernet

cable.

2. Connect your computer, network device (network-enabled consumer

devices other than computers, like game console, or switch / hub) to the

LAN port of the router.

3. Connect one side of the USB cable to the A/C power adapter and then

connect the other side to the ‘Micro USB’ port of the router.

4. Connect the A/C power adapter to wall socket.

5. Please check all LEDs on the front panel. ‘PWR’ LED should be steadily on,

WAN and LAN LEDs should be on if the computer / network device

connected to the respective port of the router is powered on and correctly

connected. If PWD LED is not on, or any LED you expected is not on,

please recheck the cabling, or jump to ‘4-2 Troubleshooting’ for

possible reasons and solution.