System information

7
2-2 Connecting to wireless broadband router by web browser
After the network connection is built, the next step you should do is setup
the router with proper network parameters, so it can work properly in your
network environment.
Before you can connect to the router and start configuration procedures,
your computer must be able to get an IP address automatically (use dynamic
IP address). If it’s set to use static IP address, or you’re unsure, please follow
the following instructions to configure your computer to use dynamic IP
address:
If the operating system of your computer is….
Windows 95/98/Me - please go to section 2-2-1
Windows 2000 - please go to section 2-2-2
Windows XP - please go to section 2-2-3
Windows Vista - please go to section 2-2-4
2-2-1 Windows 95/98/Me IP address setup:
1. Click ‘Start’ button (it should be located at lower-left corner of your
computer), then click control panel. Double-click Network icon, and
Network window will appear. Select ‘TCP/IP’, then click ‘Properties’.