Specifications

8
With both the hardware and software successfully installed into your computer, you can quickly
connect to a wireless network using one of the following methods.
 Method One:
To connect using Wireless N Client Utility
NI-707544 WIRELESS PCI ADAPTER 150N uses the Wireless N Client Utility as the
management software. The utility provides you an easy interface to connect to a network and to
change any settings related to the wireless adapter.
 Method Two:
To connect using WPS
By this method, you can connect to your network quickly on the condition that your router or
access point supports WPS or QSS as is called by some other brands.
 Method Three:
To connect using Windows built-in wireless utility
Windows users may use the built-in wireless utility to connect to a wireless network. For specific
operations, please go to To connect using Windows built-in wireless utility.
1. After installation, the utility configuration page will automatically pop up on the screen. If the
utility page does not pop up, you can also launch the utility by double-clicking on the
icon on your desktop or the icon in your system tray.
Figure 3-1
2. The Network page will display all wireless networks that are available in your area. To
connect to a network, simply highlight the wireless network name and click Connect.
SSID (Service Set Identifier) is the name of the wireless network. The adapter will
automatically connect to your target network next time if you tick Connect automatically.