Specifications

Please install the PCI adapter into your computer before installing the driver software from the

Resource CD.

1. Turn off your computer and unplug the power cord from the computer.

2. Open the case and locate an available PCI slot. Remove the metal slot cover on the back of

the PC. Keep the screws. Turn to your computer manufacturer for instructions if needed.

3. Insert the PCI adapter into the PCI slot. Make sure that all of its pins have touched the slot's

contacts. Once the adapter has been firmly inserted, screw its fastening tab. Then, close your

PC case.

4. Insert the power cable back into the computer and turn on your computer.

When the Found New Hardware wizard appears, click Cancel.

The adapter’s Setup Wizard will guide you through the installation procedures for Windows 7,

Windows Vista, and Windows XP. The procedures in different systems are quite similar, therefore

here takes the procedures in Windows XP for example.

1. Insert the Resource CD into your CD-ROM drive, and open the folder named NI-707544

WIRELESS PCI ADAPTER 150N. Double-click Setup.exe to start the installation, and then

the following screen for preparing setup will appear.

Figure 2-1