USB ADAPTER WIRELESS 300N 300 MBPS MANUAL NI-707535
ENGLISH - C O N T E N T S O F T H E PA C K A G E 4 - T E C H N I C A L S P E C I F I C AT I O N S 4 - R A N G E O F A P P L I C AT I O N S 4 - H A R D W A R E I N S TA L L AT I O N 5 - I N S TA L L I N G T H E S O F T W A R E 6 - S O F T WA R E U T I L I T Y F O R T H E U S B A D A P T E R 7 - W P S C O N F I G U R AT I O N 10 - WA R R A N T Y 10 -CE/FCC 11 2
USB ADAPTER WIRELESS 300N 300 MBPS Thank you for buying this wireless product. If you want to interconnect several PC’s for shared wireless Internet acces, you will need an additional component for the connection between your PC and/or laptop.
ENGLISH conten T s of the package Before starting your installation first check that all necessary parts are present. The box should contain: USB Adapter NI-707535 Wireless USB adapter USB extension cable CD with drivers and full manual User manual T echnical S pecifications 802.11n wireless protocol Compatible with the IEEE802.11g and IEEE802.11b standard Supports WPA/WPA2 data security, IEEE802.1x authentication, TKIP/AES encryption. Supports 150/54/48/36/24/18/12/9/6Mbps or 11/5.
H ardware installation When you have installed all the hardware and restarted the computer, the Found New Hardware Wizard is displayed. Click “Cancel”.
I nstalling the software Depending on the operating system you use, follow the instructions below to install the wireless product. Below you will find a specification of the installation file paths. “X” is the drive letter of the CD/DVD player. Go to “Start” “Run” Installing the USB adapter X:\NI-707535\Drivers\setup.exe During the installation a message is displayed with the Windows Logo test. Click “Continue Anyway”.
S oftware utility for the U S B adapter Click on “Wireless Utility” on your desktop. The following window is displayed. Click on “Scan”. A list of available wireless networks is displayed, select your network and click “Activate”. In the next screen enter the profile name you want to give your wireless network. Click on the “Security” tab. Enter the same encryption code you entered for the router. If the encryption code is not correct, you will not be able make a connection.
Click the “Current status” tab to view the status of your wireless network. Note To get the most out of your wireless products, please see the complete manual on the CD-ROM.
W P S C onfiguration WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing network quickly. WPS can only be used if the router also supports this feature. First, the WPS software should be installed, which is on the CD. Then, please follow the step-by-step instruction to complete the WPS installation. After that, WPS function can be enabled. Push the button on the router and on the adapter and wait until the following screen appears. Then click “Finish”.
C E M ark W arning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
F C C S TAT E M E N T This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.