Use and Care Manual

AUTO
Max15 30 90
AUTO
Max15 30 90
Usage of Robot Cleaner
Start/stop Cleaning
1. Press Start/Stop(or Power) button. ( )
(Turn on with alarm sound)
1. Turn over the robot as shown in the picture.
2. Attach mop on the mop plate after
microfiber wet mop soaked in water and
then wrung out.
3. Turn over the clearning robot body to its
normal position and press the start button
( ) twice please.
2. Press Start/Stop button again. ( )
(the robot is preset for 90 minutes in
normal and starts work in random.)
1. Press Start/Stop button. ( )
1. Press Start/Stop button. ( )
2. Press the time setting button( ) until
a light on the letter Max displays( ) on
the window
3. Press Start/Stop button. ( )
1. Press Start/Stop button. ( )
● Basic cleaning
● Wet mopping
ORDER
ORDER
1 2
AUTO
Max15 30 90
Body
Remote
control
ORDER
Body
Remote
control
Start/Stop button
Start/Stop button
Start/Stop button
Start/Stop button
AUTO
Max15 30 90
Body
Remote
control
Start/Stop
button
Start/Stop
button
Start/Stop
button
Start/Stop
button
Start/Stop
button
Start/Stop
button
Start/Stop
button
Start/Stop
button
Start/Stop
button
Start/Stop
button
21 3
Install the
wet mop
on the body
Install the
wet mop
on the body
※ During spot mode operation,
the time indicator light will
blink in order
● Max mode
In Max mode, robot works until the battery
is exhausted.
21 3
Set Max mode
via time button
Set Max mode
via time button
Max
Max
● Spot Mode
Spot (Spiral) cleaning mode, it moves in
spiral around within 1.5m radius.
2. Press spot mode button. ( )
AUTO
Max15 30 90
Max
21 3
AUTO
Max15 30 90
ORDER
Body
Remote
control
AUTO
Max15 30 90
※ set up spot mode is only possible
via remote control
10
AUTO
Max15 30 90
Please deselect climb mode if you wish to use the robot
in mopping mode (after installed mop plate on the bottom)
※ If not, the robot could be hanged
over on the doorsills or other
obstacles, and could not be
working properly.
Select Climb Mode Deselect Climb Mode
● U S AG E O F RO B OT C L E A N E R