Use and Care Manual

Noise of the
robot cleaner
is getting
worse.
▶Dust bin is full or filter is dirty.
▶Main brush is dirty or hairs
are accumulating between
the main brush and the
bearing.
▶Empty and clean the dust bin.
▶See <Product control & maintenance>
(page 12) and clean the filter.
▶See <Product control & maintenance>
(page 12) and clean the main brush.
Check display Cause Solution
lifted wheel, or if the floor
could not be detected
Move the robot cleaner to flat area in case
the wheel is stuck on the threshold or porch.
Wheel motor overload
Check if foreign substance such as hair or
lint exists on the wheel.
Side brush overload
Check if foreign substance such as hair or
lint exists on the main brush or side-brush.
Main brush or suction
motor overload
Empty the dustbin and clean the main brush
and filter
+
Battery exhausted Please charge
Display check message
AUTO
Max15 30 90
AUTO
Max
15
+
AUTO
+
AUTO
+
AUTO
30
90
16
※ During the operation, if the window icons are blinking, please refer
to the Checklist below first.
※ Clean the sensors and emptying the dustbin are required at least
once a week or once every two weeks. Periodic management will
extend the life of the cleaning robot.
● C H E C K B E F O R E R E PAI R R E P O R T ● D I S P L AY C H E C K M E S S AG E