User Guide
2
Connections for ICM325HN at 120/208/240 VAC
1. Remove power from system.
2. Field install a wire from Line 1 wire to Line 1 terminal.
3. Cut Line 2 wire; affix motor side to Motor 2 terminal and line side to Line 2
terminal.
4. Make 24 VAC, probe (see Page 4) and HP (see Page 5) connections.
5. Verify wiring is correct.
6. Power up system and check operation.
PSC
Fan
Motor
Run
Capacitor
Line
1
120/240
VAC
Line
2
Motor
2
PSC
Fan
Motor
Run
Capacitor
Field
Installed
Wire
Typical condenser
fan with ICM325HN
installed
120/208/240
VAC
Typical condenser fan
120/208/240
VAC