User Guide

Selectable Time Ranges
• Timing range multipliers x0.1, x1, x10, or x100
• Timing in Minutes or Seconds
(In the example shown, the first time delay is set for
“seconds” and the multiplier is x1).
(The second time delay is set for “minutes”, and the
multiplier is x10).
Timing Adjustment
• Each time delay is adjusted by closing any combination
of five binary coded switches.
• Transfer a switch to the ON position then add all the
ON switch values for the total time delay.
(In the example shown, the first time is set for 11
seconds, the second for 50 minutes).
Programming for Dual Time Delays
(DOM/DOB, Repeat Cycle)
Setting the Mode of Operation
Mode of Operation A B C
DELAY ON MAKE
DELAY ON BREAK
INTERVAL
SINGLE SHOT
DOM-DOB ON OFF OFF
REPEAT CYCLE ON OFF ON
See Page 6
10