User Guide

Single Shot
Mode of Operation
Power must be applied to the input terminals before and
during the delay period. When the initiate contact closes,
the output contacts transfer immediately and the time
delay begins. The output contacts return to their original
position when the delay period is complete.
Note: The initial contact closure can be momentary or
maintained. To reset the timer during the delay period,
remove the input power.
Connection Diagrams
Single Pole Output
1 FORM C
Input
Initiate
Switch
Double Pole Output
2 FORM C
Input
Initiate Switch
Mode Switch,
Single Shot
(See programming
instructions on P.6)
A
ON
B C
5
INITIATE
TIME
INPUT
VOLTAGE
0
V
LOAD
VOLTAGE
TIME
0
V
TIME DELAY
LOAD ENERGIZED