User Guide

Selectable Time Ranges

• Timing range multipliers x0.1, x1, x10, or x100

• Timing in Minutes or Seconds

(The example shown is set for “seconds” and the

multiplier is x1).

Timing Adjustment

• The time delay is adjusted by closing any combination

of 10 binary code switches

• Transfer a switch to the ON position then add all the

ON switch values for the total time delay.

(The example shown is set for 171 seconds).

Programming for Single Time Delays

(DOM, DOB, Interval, and Single Shot)

Setting the Mode of Operation

Mode of Operation A B C

DELAY ON MAKE OFF OFF OFF

DELAY ON BREAK OFF OFF ON

INTERVAL OFF ON OFF

SINGLE SHOT OFF ON ON

DOM-DOB

REPEAT CYCLE

See Page 10