Tuzio® Blenheim Towel Warmer Installation Guide Code: E2053 / E2057 23.5” x 50.75” Electric Plug-In Technical Helpline: Toll-Free 1-877-757-8990 www.icocanada.
Towel Warmer Installation Procedure 1 Rough-in Requirements (see figure 3) 1. A 110V receptacle located no further than 18” from electric plug-in exit location on towel warmer (see fig. 2), and not above electric plug-in exit location. 2. Wall studs or plywood backing is required in the wall at all bracket locations. See figure 2 for bracket locations. 2 Installation Instructions (see figure 1) 1. Check all items have been received. You should have Towel Warmer and mounting bracket kit.
Specifications & Drawings Model # Description Finish Weight (lb) Element Size Output WxH (mm) WxH (Inches) Metal Type E2053 Blenheim Electric Plug-In Chrome 46.2 300W 3433Btu 600 x 1290 23.5” x 50.75” Mild Steel E2057 Blenheim Electric Plug-In OR Bronze 46.2 300W 3433Btu 600 x 1290 23.5” x 50.75” Mild Steel Heating Element Specifications: 300 watt, 29.5" long, 120 volt, 60 Htz, IP55 cord, ULC approved. Includes 4ft cord and factory fitted plug.
Towel Warmers Electric In-Floor Heating Insulation Board
