Tuzio® Avento Towel Warmer Installation Guide Code: E3403 / E3404 / E3405 / E3406 23.5” x 47.5” Electric Plug-In Technical Helpline: Toll-Free 1-877-757-8990 www.icocanada.
Towel Warmer Installation Procedure 1 Rough-in Requirements (see figure 3) 1. A 110V receptacle located no further than 18” from electric plug-in exit location on towel warmer (see fig. 2), and not above electric plug-in exit location. 2. Wall studs or plywood backing is required in the wall at all bracket locations. See figure 2 for bracket locations. 2 Installation Instructions (see figure 1) 1. Check all items have been received. You should have Towel Warmer and mounting bracket kit.
Specifications & Drawings Model # Description Finish Weight Element (lb) Size Output WxH (mm) E3403 Avento Electric Plug-In Chrome 39.4 E3404 Avento Electric Plug-In Brushed Nickel E3405 Avento Electric Plug-In E3406 Avento Electric Plug-In WxH (Inches) Metal Type 300W 2007Btu 600 x 1210 23.5” x 47.5” Mild Steel 39.4 300W 2007Btu 600 x 1210 23.5” x 47.5” Stainless Steel Matte Black 39.4 450W 2007Btu 600 x 1210 23.5” x 47.5” Mild Steel Polished Nickel 39.
Towel Warmers Electric In-Floor Heating Insulation Board