Tuzio® Savoy Towel Warmer Installation Guide Code: H1051 & H1053 23.5” x 47.5” Hydronic Technical Helpline: Toll-Free 1-877-757-8990 www.icocanada.
Congratulations! You are the proud owner of a quality Tuzio Towel Warmer. This product has been specifically engineered and tested to provide optimal comfort and satisfaction. ICO carries a broad range of luxury bathroom products designed to make everyday living just a little more enjoyable! Visit www.icocanada.com to learn more.
Towel Warmer Installation Procedure 1 Rough-in Requirements - for constant circulation heating system (see figure 1) Using this installation method, the towel warmer is controlled using the valves attached to the towel warmer, and can be operated independently from the heating system. This method of installation is popular where there are multiple heating appliances connected to a closed hot water heating system, and electronic control of the individual towel warmer is not important.
Towel Warmer Installation Procedure 1 Rough-in Requirements - for dedicated heating system (see figure 2) Using this installation method, the towel warmer is controlled using the thermostat wired to the circulator pump, and cannot be operated independently from the heating system. This method of installation is popular where there is only one heating appliance connected to a closed hot water heating system, and electronic control of the individual towel warmer is required. 1.
Towel Warmer Installation Procedure 2 Installation Instructions (see figure 3) 1. Check all items have been received. You should have Towel Warmer, hardwire kit, programmable timer and mounting bracket kit. Read all instructions before continuing. 2. Fix wall supports "A" to the wall using the screws provided and in locations as shown on figure 2. 3.
Specifications & Drawings (wall rough-in) Model # Description Finish Weight (lb) Output WxH (mm) WxH (Inches) Metal Type H1051 Savoy Hydronic White 26.6 3120Btu 600 x 1210 23.5” x 47.5” Mild Steel H1053 Savoy Hydronic Chrome 26.6 3120Btu 600 x 1210 23.5” x 47.5” Mild Steel A1041 Thermostatic Angle Valve White 2.0 - - - Brass A1043 Thermostatic Angle Valve Chrome 2.0 - - - Brass A3011 10” Installation Pack White 0.
Specifications & Drawings (floor rough-in) Model # Description Finish Weight (lb) Output WxH (mm) WxH (Inches) Metal Type H1051 Savoy Hydronic White 26.6 3120Btu 600 x 1210 23.5” x 47.5” Mild Steel H1053 Savoy Hydronic Chrome 26.6 3120Btu 600 x 1210 23.5” x 47.5” Mild Steel A1051 Thermostatic Straight Valve White 2.0 - - - Brass A1053 Thermostatic Straight Valve Chrome 2.0 - - - Brass A3101 30” Installation Pack White 1.
Towel Warmers Electric In-Floor Heating Insulation Board
