User's Manual

39
5
MMEEMMOORRYY AANNDD SSCCAANN OOPPEERRAATTIIOONN
■
MMeemmoorryy cchhaannnneellss
The transceiver has 105 memory channels (plus 2 call
channels). Memory mode is useful for quickly chang-
ing to often-used frequencies.
All 105 memory channels are tuneable which means
the programmed frequency can be tuned temporarily
with the main dial, etc., in memory mode.
➀ Select M2 functions.
•Push [DISPLAY] 1 or 2 times to select M.
•Push [MENU] one or more times to select M2.
➁ Push [(F-3)V/M] to select memory mode.
➂ Rotate [M-CH] to select the desired memory chan-
nel.
•All memory channels including blank channels can be
selected.
•[UP]/[DN] on the microphone changes the frequency.
➃ To return to VFO mode, push [(F-3)V/M] again.
Any unnecessary memory channels can be cleared.
The cleared memory channels become blank chan-
nels.
➀ Push [(F-3)V/M] in the M2 display to select memo-
ry mode.
➁ Rotate [M-CH] to select a memory channel to be
cleared.
➂ Push [MCL(F-2)] for 2 sec. to clear the contents.
•The programmed frequency and operating mode disap-
pear and “}” appears.
➃ To return to VFO mode, push [(F-3)V/M] again.
■
MMeemmoorryy cchhaannnneell sseelleeccttiioonn
■
MMeemmoorryy cclleeaarriinngg
NNoottee::
During split frequency operation, programmed
memory contents can be called up to the SUB readout
(dot matrix portion of the display).
CW
CH
VFO A
[EXAMPLE]: Selecting memory channel 17.
V/M
F-3
USB
CH
MEMO
SPLIT
CH
MEMO
USB
M-CH SHIFT
MCL
F-2
SPLIT
Push for
2 sec.
CH
MEMO
USB
CH
MEMO
BLANK
MMEEMMOORRYY
CCHHAANNNNEELL
MMEEMMOORRYY
CCHHAANNNNEELL
NNUUMMBBEERR
CCAAPPAABBIILLIITTYY
TTRRAANNSSFFEERR
TTOO VVFFOO
OOVVEERR--
WWRRIITTIINNGG
CCLLEEAARR
RReegguullaarr
((sspplliitt mmeemmoorryy))
1–99
Independent transmit and receive
frequencies and one mode in each
memory channel.
In addition, tone frequencies (or
1750 Hz tone burst) can also be
stored for repeater use.
Ye s Ye s Ye s
SSccaann eeddggeess
1A–3B
(3 pair)
One frequency and one mode in
each memory channel as scan
edges for programmed scan.
Ye s Ye s No
CCaallll cchhaannnneell
((sspplliitt mmeemmoorryy))
C1 (144 MHz)
C2 (430 MHz)
Same as regular, but only 144/430
MHz band can be programmed.
Ye s Ye s No
IC-706MKIIG.qxd 02.3.27 13:53 Page 39