User's Manual

49
7
SET MODE
Q6 CARRIER Frq
((SSSSBB oonnllyy))
This item adjusts the carrier frequency (BFO frequen-
cy), allowing you to change the audio characteristics.
Selectable values are –200 to +200 Hz in 10 Hz steps.
USB
The default is 0 Hz.
Q6 RPTR TONE
((FFMM oonnllyy))
This item selects a subaudible tone for FM-T mode
operation to access a repeater. There are 50 tones
available from 67.0 Hz to 254.1 Hz (see table at right).
•Available subaudible tones Unit: Hz
The default is 88.5 Hz.
FM
Q4 CW PADDLE
((CCWW oonnllyy))
This item adjusts the CW paddle type. Four selec-
tions are available.
• n : normal (for electronic keyer use)
• r : reverse (for electronic keyer use)
• buG : When using the electronic key, key down
produces a “dash,” releasing the key
automatically produces a “dot(s).”
• oFF : Turns OFF the electronic keyer (for
straight key use)
• ud : For using the microphone’s [UP]/[DN]
keys instead of the CW paddle.
The default is “n,” normal.
CW
Q5 KEY SPEED
((CCWW oonnllyy))
This item adjusts the CW key speed. The key speed
can be selected from 6 to 60 wpm.
The default is 20 wpm.
CW
Q6 RATIO
((CCWW oonnllyy))
This item adjusts the CW key ratio (or weight). The
ratio can be selected from 2.8 to 4.5.
The default is 3.0.
CW
Q7 TONE SQL
((FFMM oonnllyy))
This item adjusts sets a subaudible tone for tone
squelch use. (the same subaudible tone frequencies
as for repeater operation are available—see above).
The default is 88.5 Hz.
FM
67.0 79.9 94.8 110.9 131.8 156.7 171.3 186.2 203.5 229.1
69.3 82.5 97.4 114.8 136.5 159.8 173.8 189.9 206.5 233.6
71.9 85.4 100.0 118.8 141.3 162.2 177.3 192.8 210.7 241.8
74.4 88.5 103.5 123.0 146.2 165.5 179.9 196.6 218.1 250.3
77.0 91.5 107.2 127.3 151.4 167.9 183.5 199.5 225.7 254.1
Q5 ANTI VOX
((SSSSBB//AAMM//FFMM oonnllyy))
This item adjusts the ANTI-VOX gain for the VOX
(voice activated transmit) function.
USB
The default is 5.
IC-706MKIIG.qxd 02.3.27 13:53 Page 49