User's Manual

95
12
SET MODE
■ Display set mode
To adjust the LCD contrast or backlight, wait until
the LCD becomes stable (10 min. or more after turn-
ing power ON). This is an inherent characteristic of
LCDs and LCD backlights and does not indicate a
transceiver malfunction.
CCoonnttrraasstt ((LLCCDD))
This item adjusts the contrast of the LCD from 0% to
100% in 1% steps.
 60%
60% (default)
BBaacckklliigghhtt ((LLCCDD))
This item adjusts the brightness of the LCD from 0%
to 100% in 1% steps.
 50%
50% (default)
HHoorriizzoonn
This item adjusts the horizontal position of the LCD
from 1 to 8.
 4
Horizontal position is 4. (default)
BBaacckklliigghhtt((SSwwiittcchheess))
This item adjusts the brightness of the switches from
1 to 8.
 8
Backlight level is 8. (Maximum; default)
DDiissppllaayy TTyyppee
This item sets the LCD screen type. There are 8 se-
lectable types: A, B, C, D, E, F, G and H.
A
A
A-type LCD screen (default)
DDiissppllaayy FFoonntt
This item sets the font of the frequency readouts.
There are 7 selectable fonts: Basic1, Basic2, Pop,
7seg (7 segment numeral), Italic 1, Italic 2 and Clas-
sic.
I
Ittaalliicc22
Italic 2 font (default)
MMeemmoorryy NNaammee
This item sets the memory name indication ON and
OFF.
See p. 80 for details.
OONN
Memory name is displayed.
(default)
O
OFFFF
Memory name is not dis-
played.