User's Manual

100
12
SET MODE
■ Miscellaneous (others) set mode (continued)
R
RTTTTYY MMaarrkk FFrreeqquueennccyy
This item selects the RTTY mark frequency. RTTY
mark frequency is switched between 1275, 1615 and
2125 Hz.
22112255
2125 Hz RTTY mark
frequency (default)
1
1227755
1275 Hz RTTY mark
frequency
RRTTTTYY SShhiifftt WWiiddtthh
This item adjusts the RTTY shift width. There are 3
selectable values: 170, 200 and 425 Hz.
117700
170 Hz RTTY shift
frequency (default)
4
42255
425 Hz RTTY shift
frequency
RRTTTTYY KKeeyyiinngg PPoollaarriittyy
This item selects the RTTY keying polarity. Normal or
reverse keying polarity can be selected.
When reverse polarity is selected, Mark and Space
are reversed.
- Normal : Key open/close = Mark/Space
- Reverse : Key open/close = Space/Mark
NNoorrmmaall
Normal polarity (default)
RReevveerrssee
Reverse polarity
[[AANNTT]] SSwwiittcchh
You can set the antenna connector selection to auto-
matic, manual or non-selection (when using 1 an-
tenna only).
When “Auto” is selected, the antenna switch is acti-
vated and the band memory memorizes the selected
antenna. See p. 87 for details.
When “Manual” is selected, the antenna switch is ac-
tivated and selects an antenna manually.
When “OFF” is selected, the antenna switch is not ac-
tivated and does not function. The [ANT1] connector
is always selected in this case.
A
Auuttoo
Antenna switch is activated and the
selection is automatically memorized.
(default)
M
Maannuuaall
Antenna switch is activated.
O
OFFFF
Antenna switch is deactivated and
[ANT1] is always selected.