User's Manual

103
12
SSET MODE
■ Miscellaneous (others) set mode (continued)
E
Exxtteerrnnaall KKeeyyppaadd
This item sets the external keypad capability and
function.
For your information
The following diagram shows the equivalent circuit of
an external keypad and connects to the pin 3 and
pin 7of the [MIC] connector (p. 18).
A
Auuttoo
Pushing one of external keypad
switches, transmits the desired voice
memory during a phone mode (SSB,
AM or FM), or memory keyer contents
during CW mode operation.
V
VOOIICCEE PPLLAAYY((TTXX))
Pushing one of external keypad
switches, transmits the desired voice
memory contents during a phone
mode operation.
K
KEEYYEERR SSEENNDD
Pushing one of external keypad
switches, transmits the desired keyer
memory contents during CW mode
operation.
O
OFFFF
External keypad does not function.
(default)
To [MIC] connector pin e
To [MIC] connector pin u
1.5kΩ
±
5%
1.5kΩ
±
5%
2.2kΩ
±
5%
4.7kΩ
±
5%
S1
(T1/M1)
S2
(T2/M2)
S3
(T3/M3)
S4
(T4/M4)
USER EXTERNAL KEYPAD
CCII--VV BBaauudd RRaattee
This item sets the data transfer rate. 300, 1200, 4800,
9600, 19200 bps and “Auto” are available.
When “Auto” is selected, the baud rate is automati-
cally set according to the connected controller or re-
mote controller.
AAuuttoo
Auto baud rate
(default)
1199220000
19200 bps
CCII--VV AAddddrreessss
To distinguish equipment, each CI-V transceiver has
its own Icom standard address in hexadecimal code.
The IC-756PROIII’s address is 6Eh.
When 2 or more IC-756PROIII’s are connected to an
optional CT-17
CI - V LEVEL CONVERTER , rotate the tun-
ing dial to select a different address for each IC-
756PROIII in the range 01h to 7Fh.
66EEhh
Address of 6Eh
(default)
7
7FFhh
Address of 7Fh
CCII--VV TTrraannsscceeiivvee
Transceive operation is possible with the
IC-756PROIII
connected to other Icom HF transceivers or receivers.
When “ON” is selected, changing the frequency, op-
erating mode, etc. on the IC-756PROIII automatically
changes those of connected transceivers (or re-
ceivers) and vice versa.
OONN
Transceive ON
(default)
OOFFFF
Transceive OFF
CCII--VV wwiitthh IICC--773311
When connecting the IC-756PROIII to the IC-735 for
transceive operation, you must change the operating
frequency data length to 4 bytes.
•This item must be set to “ON” only when operating the
transceiver with the IC-735.
OONN
4 bytes of frequency data
OOFFFF
5 bytes of frequency data
(default)