User's Manual

36
4
RECEIVE AND TRANSMIT
D Convenient functions for transmit
• Break-in function (p. 66)
➥ Push [BK-IN] several times to select the break-in
OFF, semi break-in and full break-in.
•“BK-IN SEMI” or “BK-IN FULL” appears when the
semi break-in or full break-in function is set to ON, re-
spectively.
DD
About CW reverse mode
CW-R (CW Reverse) mode receives CW signals with
a reverse side CW carrier point like that of LSB and
USB modes.
Use when interfering signals are near a desired signal
and you want to change the interference tone.
q Push [CW/RTTY] once or twice to select CW
mode.
w Push [CW/RTTY] for 1 sec. to select CW or CW-R
mode.
• Check the interfering tone.
Push
for 1 sec.
BFO
CW-R mode (USB side)
BFO
Desired signal
CW mode (LSB side)
Interference Desired signalInterference
CW/RTTY
[CW/RTTY]
DD
About CW pitch control
The received CW audio pitch and monitored CW
audio can be adjusted to suit your preference (300 to
900 Hz in 25 Hz steps) without changing the operat-
ing frequency.
➥ Rotate [CW PITCH] to suit your preference.
• Adjustable within 300 to 900 Hz in 25 Hz steps.
The filter set mode screen graphically displays the
CW pitch operations. (See at left.)
FILTER
FILTER
CW
CW
FI
FI
L 1
FI
FI
L 2
FI
FI
L 3
1.2k
1.2k
500
500
250
250
PBT2
PBT2
PBT1
PBT1
450 700 950
450 700 950
BK-IN
BK-IN
OFF
OFF
AGC
AGC
MID
MID
1/4
1/4
OFF
OFF
BW
BW
DEF
DEF
[CW PITCH]
4