User's Manual
74
7
VOICE RECORDER FUNCTIONS
■ Digital voice recorder (continued)
• Recording a message for transmit
To transmit a message using a voice recorder, record
the desired message in advance as described below.
q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Push [(F-2)VOICE] to call up the voice recorder
screen.
e Push [(F-2)MIC REC] to select the voice memory
recording screen.
r Push the desired memory channel switch,
[(F-1)T1] – [(F-4)T4], for 1 sec. to start recording.
•Speak into the microphone without pushing the [PTT]
switch.
• Previously recorded contents are cleared.
t Adjust the [MIC GAIN] control so that the [REC
LEVEL] indicator reads within 100%.
y Push the selected memory channel switch,
[(F-1)T1] – [(F-4)T4], again to stop recording.
•Recording is automatically terminated when the total
time of recorded messages, T1–T4, becomes 90 sec.
u Push [EXIT/SET] twice to exit the voice memory
screen.
• Confirming a message for transmit
q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Push [(F-2)VOICE] to call up the voice recorder
screen.
e Push [(F-2)MIC REC] to select the voice memory
recording screen.
r Push the desired memory channel switch,
[(F-1)T1] – [(F-4)T4], momentarily to start playback
and confirmation.
t Push the selected memory channel switch,
[(F-1)T1] – [(F-4)T4], again to stop playback if de-
sired.
y Push [EXIT/SET] twice to exit the voice memory
screen.
•Programming a memory name for
transmit
Memory channels can be tagged with alphanumeric
names of up to 20 characters each.
Capital letters, small letters, numerals, some symbols
(! # $ % & ¥ ? " ' ` ^ + – ✱ /
.,
: ; = < > ( ) [ ] { } | _
_
)
and spaces can be used. (See step t below.)
q Record a message as described at left.
w Call up the voice memory recording screen as de-
scribed in steps q to e at left.
e Push [(F-5)NAME] to enter memory name edit
condition.
•Acursor appears and blinks.
r Push [(F-5)T1..T4] several times to select the de-
sired voice memory.
t Input the desired character by rotating the tuning
dial or by pushing the band key for number input.
• Push [ABC] or [abc] to toggle capital and small letters.
•Push [123] or [etc] to toggle numerals and symbols.
• Push [(F-1)Ω] or [(F-2)≈] for cursor movement.
• Push [(F-3)DEL] to delete the selected character.
• Push [(F-4)SPACE] to input a space.
•Pushing the transceiver’s keypad, [0]–[9], can also
enter numerals.
y Push [EXIT/SET] to input and set the name.
• The cursor disappears.
u Repeat steps r to y to program another voice
memory’s name, if desired.
i Push [EXIT/SET] twice to exit the voice memory
screen.
ABCABC
123
123
T4T4 -
-
-
T1
T1 10s10s
T3
T3 -
-
-
VOICE MIC-RECORDVOICE MIC-RECORD
T2T2 -
-
-
ABCABC
ç
å
DELDEL
SPACE
SPACE
T1..T4
T1..T4
Character
group
keys
Selected
character
VOICE MIC-RECORDVOICE MIC-RECORD
COMPCOMP
OFF
OFF
WIDE
WIDE
AGCAGC
MID
MID
VOXVOX
OFF
OFF
RECREC LEVELLEVEL
0
50
50
100
100
% % RemainRemain
80s
80s
T1T1
T2T2
T3T3 T4T4
NAMENAME
PLAYPLAY
T1T1 10s10s
T2
T2 ------
T3
T3 ------
T4
T4 ------
COMPCOMP
OFF
OFF
WIDE
WIDE
AGCAGC
MID
MID
VOXVOX
OFF
OFF
RECREC LEVELLEVEL
0
50
50
100
100
% % RemainRemain
80s
80s
VOICE MIC-RECORDVOICE MIC-RECORD
T1T1
T2T2
T3T3 T4T4
NAMENAME
RECREC
T1T1 10s10s
T2T2 ------
T3
T3 ------
T4
T4 ------
VOICE MIC-RECORDVOICE MIC-RECORD
COMPCOMP
OFF
OFF
WIDE
WIDE
AGCAGC
MID
MID
VOXVOX
OFF
OFF
RECREC LEVELLEVEL
0
50
50
100
100
% % RemainRemain
90s
90s
T1T1
T2T2
T3T3 T4
NAMENAME
T1T1 ------
T2
T2 ------
T3
T3 ------
T4
T4 ------
VOICE RECORDERVOICE RECORDER
COMPCOMP
OFF
OFF
WIDE
WIDE
AGCAGC
MID
MID
VOXVOX
OFF
OFF
PLAYPLAY
MIC RECMIC REC
TX LEV.TX LEV.
SETSET
VOICE RECORDER MENUVOICE RECORDER MENU
PLAY
PLAY TX Variable TX Variable ◊ 4ch (Total 90s) 4ch (Total 90s)
RX 15s Endless
RX 15s Endless ◊ 4ch (TOT 30m) 4ch (TOT 30m)
MIC REC Mic Record/Record check
MIC REC Mic Record/Record check
TX LEV. Recorder Output Adjust
TX LEV. Recorder Output Adjust
SET Auto Monitor SET
SET Auto Monitor SET
7