User Guide

62
12
DIGITAL MODE OPERATION
12
DD
When calling the desired station
ySelect the desired call sign.
- Push [BANK ] twice to select the call sign select mode.
• “YUC” appears.
- Rotate [DIAL] to select the desired call sign (pre-pro-
grammed), or set the desired call sign. (see pgs. 59, 60)
- Push any key other than indicated function keys to exit
option set mode.
uPush and hold [PTT] to transmit and speak into the micro-
phone at normal voice level.
• Transmit indicator appears and the RF meter shows the output power.
iRelease [PTT] to return to receive.
• The other station call sign will be received.
• Received call signs can be stored into the received call record
automatically. See page 63 for details.
NOTE: The digital mode operation is vastly different than FM
mode. One of the differences is in the digital mode the
squelch does not function as FM mode, changing the squelch
setting will not open to hear the hiss of “White Noise,” only
activate for digital squelch function as CSQL (Digital code
squelch), DSQL (Call sign squelch) or S-meter squelch.
n Select the desired call sign.
- Push [BANK/OPTION] twice to select the
call sign select mode.
• “YUC” appears.
- Push [
YY
] or [
ZZ
] to select the desired call
sign (pre-programmed), or set the desired
call sign. (see p. 60)
- Push [
CLR A(MW)] to exit option set
mode.
m Push and hold [PTT] to transmit and speak
into the microphone at normal voice level.
• Transmit indicator appears and the RF meter
shows the output power.
, Release [PTT] to return to receive.
• The other station call sign will be received.
• Received call signs can be stored into the re-
ceived call record automatically. See page 63
for details.
BANK/OPTION
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
OPT