User's Manual Part 1

■ LCD display
q BAND WIDTH INDICATOR (p. 5-12)
Shows the passband width of the IF filter.
w MODE INDICATOR
Shows the selected mode.
e SHIFT FREQUENCY INDICATOR (p. 5-12)
Shows the shift frequency of the IF filter.
r QUICK TUNING INDICATOR (p. 3-6)
Appears when the quick tuning step function is in use.
t PASSBAND WIDTH INDICATOR (p. 5-12)
Graphically displays the passband width for twin
PBT operation and center frequency for IF shift op-
eration.
y BANDPASS FILTER INDICATOR
Appears when the narrow filter (500 Hz or less) is
selected during CW, RTTY or PSK31 operation.
u RTTY TUNING INDICATOR
Shows the tuning level in RTTY mode.
i CLOCK READOUT
Shows the current time.
o S/RF METER (p. 3-10)
Shows the signal strength while receiving. Shows
the relative output power, SWR, ALC or compres-
sion levels while transmitting.
!0 TX INDICATOR
Indicates the frequency readout for transmit.
!1 VFO/MEMORY CHANNEL INDICATOR (p. 3-3)
Indicates the VFO mode or selected memory chan-
nel number.
!2 IF FILTER INDICATOR
Shows the selected IF filter number.
!3 FREQUENCY READOUTS
Shows the operating frequency.
• Outline characters are used for non-accessing readout.
!4 SELECT MEMORY CHANNEL INDICATOR (p. 9-7)
Indicates the displayed memory channel is set as a
select memory channel.
!5 MEMORY CHANNEL READOUTS
➥ Shows the selected memory channel contents in
VFO mode.
➥ Shows the VFO contents in memory mode.
!6 MULTI-FUNCTION SWITCH GUIDE
Indicates the function of the multi-function switches.
!7 LCD FUNCTION SWITCH GUIDE
Indicates the function of the LCD function switches
([F-1] – [F-7]).
!8 MULTI-FUNCTION SCREEN
Shows the screens for the multi-function digital
meter, spectrum scope, voice recorder, memory
channel, scan, memory keyer, RTTY decoder, PSK
decoder, IF filter selection or set modes, etc.
1-14
1
PANEL DESCRIPTION
q w e t uy ir q w e t uyr
!7
!4 !5
!6
!4
!5
!3
!2
!1
!0
o
!8