User's Manual Part 1

3-6
D
Quick tuning step
The operating frequency can be changed in kHz steps
(0.1, 1, 5, 9, 10, 12.5, 20 or 25 kHz selectable) for
quick tuning.
q Push [TS] to turn the quick tuning function ON.
•“Z” appears when the quick tuning function ON.
w Rotate the main dial to change the frequency in pro-
grammed kHz steps.
e Push [TS] again to turn OFF the indicator.
r Rotate the main dial for normal tuning if desired.
D
Selecting “kHz” step
q Push [TS] to turn the quick tuning function ON and
OFF.
•“Z” appears when the quick tuning function ON.
w Push [TS] for 1 sec. to enter tuning step setting dis-
play.
• Selected tuning steps for all modes appear.
e Select the desired operating mode.
r
Rotate the main dial to select the desired tuning step.
t Repeat steps e and r to select quick tuning steps
for other modes, if desired.
y Push [EXIT/SET] to exit the setting display.
NOTE: When entering into quick tuning step set
mode, the quick tuning function must be activated,
and the set mode can be accessed from either
band’s quick tuning switch, [TS]. Therefore, use the
same band’s [TS] for quick tuning function selection
and the set mode entering.
D
1
⁄4 tuning step function
When operating in SSB data, CW, RTTY or PSK, the
1
⁄4 tuning function is available. Dial rotation is reduced
to
1
⁄4 of normal when the
1
⁄4 tuning function is in use.
➥ Push [1/4] to toggle the
1
⁄4 tuning function ON and
OFF.
• “ ” appears when the
1
⁄4 tuning function ON
1
⁄4
1
⁄4 tuning step OFF
1
⁄4 tuning step ON
Main dial [TS]Select mode [TS]
3
BASIC OPERATIONS
Quick tuning indicator Quick tuning indicator