User's Manual Part 1

vi
D DSP filter shape …………………………………………………… 5-14
D Filter shape set mode ……………………………………………… 5-14
Dualwatch operation ………………………………………………… 5-16
Noise blanker ………………………………………………………… 5-17
D NB set mode ………………………………………………………… 5-17
Noise reduction ………………………………………………………… 5-18
Dial lock function ……………………………………………………… 5-18
Notch function ………………………………………………………… 5-19
Digital selector ………………………………………………………… 5-19
Section 6 FUNCTIONS FOR TRANSMIT
VOX function …………………………………………………………… 6-2
D Using the VOX function …………………………………………… 6-2
D Adjusting the VOX function ………………………………………… 6-2
D VOX set mode ……………………………………………………… 6-2
Break-in function ………………………………………………………… 6-3
D Semi break-in operation …………………………………………… 6-3
D Full break-in operation ……………………………………………… 6-3
TX function …………………………………………………………… 6-4
D TX monitor function ………………………………………………… 6-4
Monitor function ………………………………………………………… 6-4
Transmit filter width setting (SSB only) ……………………………… 6-5
Speech compressor (SSB only) ……………………………………… 6-5
Split frequency operation ……………………………………………… 6-6
Quick split function ……………………………………………………… 6-7
D Split lock function …………………………………………………… 6-7
Section 7 VOICE RECORDER FUNCTIONS
About digital voice recorder …………………………………………… 7-2
Recording a received audio …………………………………………… 7-3
D Basic recording ……………………………………………………… 7-3
D One-touch recording ………………………………………………… 7-3
Playing the recorded audio …………………………………………… 7-4
D Basic playing ………………………………………………………… 7-4
D One-touch playing …………………………………………………… 7-4
Protect the recorded contents ………………………………………… 7-5
Erasing the recorded contents ………………………………………… 7-5
Recording a message for transmit …………………………………… 7-6
D Recording …………………………………………………………… 7-6
D Confirming a message for transmit ………………………………… 7-6
Programming a memory name ……………………………………… 7-7
Sending a recorded message ………………………………………… 7-8
D Transmit level setting ……………………………………………… 7-8
Voice set mode ………………………………………………………… 7-9
Saving a voice memory into the CF card …………………………… 7-10
D Saving the received audio memory ……………………………… 7-10
D Saving the TX memory …………………………………………… 7-10
Section 8 MEMORY OPERATION
Memory channels ……………………………………………………… 8-2
Memory channel selection …………………………………………… 8-2
D Using the [Y]/[Z
] keys ……………………………………………… 8-2
D Using the keypad …………………………………………………… 8-2
Memory list screen ……………………………………………………… 8-3
D Selecting a memory channel using the memory list screen …… 8-3
D Confirming programmed memory channels ……………………… 8-3
TABLE OF CONTENTS